DIY

Ring Holders

Store your jewelry in style! Today on the blog we are going to walk you step by step on how to make the cutest ring holders. If you're anything like me, you have far TOO many rings. At the end of the day I tend to usually just throw my rings in a dish, but let me tell ya... that dish is a little passed full and totally overflowing. Now, I have plenty of room to store all my rings safely and fashionably! Your rings are gonna soon look amazing on AND off! Supplies you'll need: -Oven safe clay -Acrylic paints -Glossy top coat -Different size paint brushes Processed with VSCO with a6 preset Start by rolling your clay into a ball. Begin to roll out into a long tube shape. Next, begin to knead the clay until you get it to the cone shape of your liking. Processed with VSCO with a6 preset Processed with VSCO with a6 preset Processed with VSCO with a6 preset I decided to make mine a few different sizes to keep it interesting. Once you have formed your cones, stick them in the oven at 300 degrees. Let bake for about 15 minutes. Processed with VSCO with a6 preset Once you have baked the clay cones for 15 minutes. Pull out of the oven and let cool. Now for the fun part, PAINTING TIME! I went with a metallic gold and bronze and a little bit of black here and there. You can get as creative as you like! Feel free to make your cones match your style and paint them using any colors or patterns! Processed with VSCO with a6 preset Processed with VSCO with a6 preset After painting, let dry for about 10 minutes. Then, go over the finished product with a glossy top coat for protection and a bit of shine! Processed with VSCO with a6 preset There ya have it! Processed with VSCO with a6 preset Shop all rings at Puravidabracelets.com!
0 comments
Leave a commentYour email address will not be published.